Aiwa XR-MT1000 Operating Instructions Manual page 11

SETTING A NEW EQUALIZATION CURVE
MANUALLY
1,2
3
The equalization curve can be customized to suit your preference,
7
Press FREQ DOWN or FREQ UP.
2
%", ?AI-,.-
A —--- .__, – .-.. .––
P-PA --, s,., ----
3
4
vvtmln 4 seconas, press rKELf uUVVN Or PHtLf
UP repeatedly to select the frequency you want
tc) adjust.
The selected frequency indicator flashes for 4 seconds.
Up to 5 customized equalization curves can
manual modes Ml - M5.
I
YJ'ithin 8 seconds, turn MULTI JOG to adiust the
level of the selected frequency.
1,3
2,,4
2
R,epeat steps 2 and 3 to complete the equalization
curve.
To
cancel the graphic equalizer
Press GEQ once or twice so that " GEQ OFF appears on the
display of the stereo receiver.
When using the remote control, press GEQ repeatedly until "GEQ
OFF" is displayed.
Set a new equalization curve with
FREQ UP and MULTI JOG.
a
w
N
FREQ DOWN, ~
ts
See "SETTING A NEW EQUALIZATION CURVE MANUALLY",
The created curve is displayed for 8 seconds.
If this step is not completed within 4 seconds, press GEQ
first to display "GEQ ON". Then press ENTER within 4
seconds.
Within 8 seconds, turn MULTI JOG to select one
of the manual modes Ml - M5 to store the curve.
Within 8 seconds, press ENTER.
The new equalization curve is stored,
3
4
To select the stored equalization curve
Press GEQ, and turn MULTI JOG to select one of the manual
modes Ml - M5 within 4 seconds.
ENGLISH
11