Programmed Edit Recording - Aiwa XR-M99 Operating Instructions Manual

PROGRAMMED EDIT RECORDING
; =
: = MODE
FUNCTION
ee
oO ie}
UPDOWN |
[tog ooe
FUNCTION
zi
<<>>
Cc) &
@REC
a
<4 bP a3) 5
Programmed edit function enables CD recording while checking
the remaining time on each side of the tape as the tracks are
programmed.
The programmed edit recording will not start from a point halfway
in the tape. The tape must be recorded from the beginning of
either side.
7 Insert the tape into the deck.
Insert the tape with the side to be recorded on first facing
upward.
2 Press the FUNCTION UP or DOWN button on the
Stereo Integrated Amplifier or the FUNCTION
button on the remote control repeatedly so that
"CD" appears. Then load the disc.
3 Press the MODE button on the remote control
repeatedly until "EDIT" lights up and "PRGM"
flashes on the display.
4 Press the numbered buttons to designate the tape
length.
10 to 99 minutes can be specified.
Example: When using a 60-minute tape, press the 6 and 0
buttons.
«The <4 and ® buttons on the Compact Disc Player or
the remote control are also available to designate the tape
length.
Tape side A (front side)
Maximum recording time for
side A
5 Press the numbered buttons to program a track.
Example: To select the 10th track, press the numbered
buttons +10 and 0.
6 Repeat step 5 for the rest of the tracks for side A.
A track whose playing time is longer than the remaining time
cannot be programmed.
Selected track
Total number of
programmed tracks
Remaining time of side A
7 Press the MODE button to select side B and
program the tracks for side B.
After confirming B on the display, repeat step 5.
Tape side B (opposite side)
8 Press the @ REC button to start recording.
The tape is rewound to the beginning of the side facing upward,
the lead segment is played through for 10 seconds, and
recording starts. When recording on the side facing upward
(A) ends, recording on the opposite side (B) starts.
To stop recording
Press the Il button on the Stereo Cassette Deck or the remote
control. Recording and CD play stop simultaneously.
To check the order of the programmed track numbers
Before recording, press the MODE button to select side A or B,
and press the ® button repeatedly.
Programmed
track numbers Track number
Program number
To change the program of each side
Press the MODE button to select side A or B, and press the
button to clear the program of the selected side. Then program
tracks again.
To clear the edit program
Press the Il button on the Compact Disc Player or the remote
control repeatedly so that "EDIT" disappears on the display.
Recording is inhibited if the erasure prevention tab on either side
of the tape is broken off.
ENGLISH 19