Aiwa XR-MT1000 Operating Instructions Manual page 27

Before or during CD play, you can reserve up to 15 tracks to be
played after the current track. Each reservation is cleared when
it finishes playing.
Use the remote
1
2
3
4
5
control.
F%ess CD and insert the discs into the CD player.
F%ess PRGM u in stop mode.
Press DISC DIRECT PLAY, then press numbered
buttons 1-3 within 3 seconds to select a disc.
l-hen, press numbered buttons O-9 and + 10 to
program a track.
Reserved disc number
Reserved track number
Flepeat step 3 to reserve other tracks.
FJress 4P (or 011 PLAY/PAUSE on the CD
player) to start play.
After a track is played, it is cleared from the program.
Disc number of the Number of remaining
last reservation
reserved tracks
To
add a reservation during play
Repeat step 3.
To check the reserved tracks
Press EDIT/CHECK repeatedly. Each time it is pressed, the
disc number and track number are displayed in the reserved
order.
To stop play
Press STOP (or CLEAR on the remote control).
When <P (or -llPLAY/PAUSE on the CD player) is pressed
to restart, the play last track started will be replayed.
To skip a current track
Press -. The skipped track is cleared from the program.
To clear all the
reservations
Press - repeatedly until "d PO" is displayed.
Press it once more to cancel the Karaoke programs. The display
returns to that of CD play.
If the reserved track number does not exist on the selected
disc, the unit stops playing and the display flashes.
In this case, press > to skip the error track. Then press 4*
(or PllPLAY/PAUSE on the CD player) to start play with the
next reserved track.
When PRGM is pressed repeatedly in step 2, PRGM is
highlighted and the unit enters the CD program play mode (page
26).
To cancel program play, press 9STOP (or CLEAR on the
remote control)
To use microphones and the Karaoke function, see
"MICROPHONE MIXING (KARAOKE)" on page 22.
Track number of the last reservation
ENGLISH
27