Quick Start Guide; Connecting Via Bluetooth - Sprout SOUNDLOOP Product Manual

1. 1. WHAT'S IN THE BOX? WHAT'S IN THE BOX?
3.

QUICK START GUIDE

TURNING SOUNDLOOP PARTY SPEAKER ON/OFF
To power on, long press the power button for 2 seconds.
Soundloop Party Speaker will announce "power on" whilst the
LED indicator light at the top will light up. It will flash blue quickly
until a Bluetooth connection has been established.
To power off, long press the power button for 3 seconds. The
speaker will announce "power off" with the LED indicator also
turning off.
To preserve battery, Soundloop Party Speaker will automatically
turn off after 30 minutes of no Bluetooth connection.
4
3. QUICK START GUIDE

CONNECTING VIA BLUETOOTH

1. Firstly, power on Soundloop Party Speaker by pressing the
power button for 2 seconds. The LED indicator light will flash
blue quickly to indicate Soundloop Party Speaker is ready for
pairing.*
2. Turn on Bluetooth on your mobile phone/ music device.**
3. 'SOUNDLOOP PARTY SPEAKER' will appear on your mobile
phone/music device. Select 'SOUNDLOOP PARTY SPEAKER' to
pair.
4. Once your mobile phone/music device is connected to the
Soundloop Party Speaker, the LED indicator light will flash blue
slowly, and the speaker will announce "Bluetooth connected".***
5. Enjoy your music.
*Soundloop Party Speaker will automatically enter Bluetooth pairing
mode when turned on for the first time. To disconnect your device from
Bluetooth, press and hold the play/pause/answer button for 2 seconds.
Repeat this process to reconnect Bluetooth.
**If you are not familiar with Bluetooth pairing for your mobile phone or
music device, refer to the user guide for your mobile phone/music device
for instructions to pair a new device using Bluetooth.
***Soundloop Party Speaker will always store the last device paired and
if the device is within Bluetooth range, Soundloop Party Speaker will
automatically connect to the device.
5