Connecting The Microphone - Sprout SOUNDLOOP Product Manual

1. 1. WHAT'S IN THE BOX? WHAT'S IN THE BOX?
3. QUICK START GUIDE

CONNECTING THE MICROPHONE

To use the included microphone, connect the cable to the
microphone making sure to carefully align the pins. Then proceed
to connect the cable into Soundloop Party Speaker's microphone
input port. You can control the volume of the microphone by
pressing the mic volume +/- buttons. You can also control the
echo using the echo +/- buttons.
Please note: In PartySync mode, the microphone will only work
on the speaker it is connected to.
CONNECTING YOUR GUITAR
To use a guitar, connect the guitar cable (not included) to your
guitar. Then proceed to connect the cable into Soundloop Party
Speaker's guitar input port. You can control the volume of the
guitar by pressing the guitar volume +/- buttons.
Please note: In PartySync mode, the guitar will only work on the
speaker it is connected to. It is possible to also use other audio
accessories with a 6.3mm jack plugged in the guitar input, such
as an additional microphone (not included).
USING LIGHT EFFECTS
To use light effects on Soundloop Party Speaker, short press
the light effects button. Continue pressing the button to cycle
through 8 available modes.
Please note: Some light effects will sync with the music you are
playing through Soundloop Party Speaker.
8
3. QUICK START GUIDE
9