Quick Start Guide - Sprout SOUNDWAVE Product Manual

3.

QUICK START GUIDE

TURNING SOUNDWAVE ON/OFF
To power on, long press the power button for 2
seconds. Soundwave will announce "power on"
whilst the LED indicator light at the top will light up.
It will flash blue/red until a Bluetooth connection
has been established.
To power off, long press the power button for 2
seconds. The speaker will announce "power off"
with the LED indicator also turning off.
To preserve battery, Soundwave will automatically
turn off after 5 minutes of no Bluetooth or 3.5mm
aux connection.
CONNECTING VIA 3.5MM AUX CABLE
To play audio using the aux cable, connect the cable
from the Soundwave to your device. The LED indicator
light will change to a solid red. Soundwave will play the
audio when you press 'play' on your device.
Please note: Using 3.5mm aux input will override a
Bluetooth source input.
4
3. QUICK START GUIDE
CONNECTING VIA BLUETOOTH
1. Press the power button for approximately two
seconds. The LED indicator light will flash blue and
red to indicate Soundwave is ready for pairing.*
2. Turn on Bluetooth on your mobile phone/
music device.**
3. 'Soundwave' will appear on your mobile phone/
music device. Select 'Soundwave' to pair.
4. Once your mobile phone/music device is
connected to the soundwave speaker, the LED
indicator light will change to a solid blue, and the
speaker will announce "Bluetooth connected".***
5. Enjoy your music.
*Soundwave will automatically enter Bluetooth pairing mode
when turned on for the first time. To reset Bluetooth pairing,
hold the UNISYNC button for 6 seconds to initiate Bluetooth
pairing mode again.
**If you are not familiar with Bluetooth pairing for your mobile
phone or music device, refer to the user guide for your mobile
phone/music device for instructions to pair a new device
using Bluetooth.
***Soundwave will always store the last device paired
and if the device is within Bluetooth range, Soundwave
will automatically connect to the device.
5