Page 2
INSTRUCTION MANUAL Maverick Hybrid 3-IN-1 BLUETOOTH SPEAKER, WIRELESS CHARGER AND POWERBANK...
Page 3
Sprout is an Australian brand that develops technology accessories to enhance your world, now and into the future. From maximising your productivity at work and while you study to enriching your downtime and recreational activities, we develop accessories that add value to your way of life.
CONTENT WHAT’S IN THE BOX? PRODUCT OVERVIEW QUICK START GUIDE EXTRA CONTROLS SPECIFICATIONS IMPORTANT SAFETY INFO CONSUMER GUARANTEE Scan the QR code to access an online version of this manual...
What’s in the box? Thank you for choosing our Maverick Hybrid 3-in-1 Bluetooth Speaker, Wireless Charger and Powerbank. For optimum performance and safety, please read instructions carefully before usage. Please keep this manual for future reference. Maverick Hybrid USB Type-A to USB Type-C charging cable...
2. White LEDs indicate the level of charge**. *Power source options include USB connection to a Sprout AC power adapter, a Sprout car charger or computer/notebook USB connection. **Full charge will take approximately 4 hours.
Page 8
The speaker will announce “Low Battery” when the battery level reaches 10%. At this point, wireless charging and USB charging will be disabled. They will remain disabled until the battery is completely drained, or the Maverick Hybrid is plugged in to charge.
Page 9
Quick Start Guide USB charging output Maverick Hybrid can connect and recharge a variety of devices using its 10050mAh internal battery. Simply connect your devices USB Type-C or USB Type-A cable into the available USB ports. Wireless charging Press the power button once to turn on the powerbank, place the phone vertically on the wireless charging symbol.
Page 10
Quick Start Guide Bluetooth Pairing 1. Press the power button for approximately three seconds. Maverick Hybrid single LED will flash blue/red to indicate the Maverick Hybrid is ready for pairing*. 2. Turn on Bluetooth on your mobile phone/music device**. 3. ‘Maverick Hybrid’ will appear on your mobile phone/music device.
Extra Controls UNISYNC mode If you are using the UNISYNC feature you can connect your Maverick Hybrid as a primary, then connect up to 50 UNISYNC devices with replicas. To connect to another UNISYNC compatible speaker, short press the UNISYNC button on your primary device once to enter UNISYNC Mode.
Page 12
When it is flashing red and blue LED light, the Maverick Hybrid is in pairing mode. The battery LED indicator will flash from one to four LEDs to indicate Maverick Hybrid is charging. The lights will stop flashing once Maverick Hybrid is fully charged.
Specifications • Unit size: 190 x 79 x 31 mm (L x W x H) • Weight: 400g • Speaker: Total 10W • Frequency range: 20Hz - 22kHz • Power source: 3.7V 10050mAh lithium battery • Playtime: 20 hours from full charge at 50% volume level •...
Important Safety Information 1. Keep Maverick Hybrid dry. Never place Maverick Hybrid in water. 2. Do not store Maverick Hybrid in very hot or cold areas. It is recommended that you use your Maverick Hybrid at room temperature only. 3. Do not open to modify, repair, or remove any original componentry of the Maverick Hybrid.
For more information about your rights under Australia Consumer Law go to www.accc.gov.au. Your Maverick Hybrid Speaker is warranted to the original owner for 24 months from the date of purchase against defects in material and workmanship under normal use and service.
Need help?
Do you have a question about the Maverick Hybrid and is the answer not in the manual?
Questions and answers