Changing The Bands; Specifications; Battery Information - Garmin APPROACH S44 Owner's Manual

Changing the Bands

You can replace the bands with new Approach S44 bands. To purchase replacement bands, go to
buy.garmin.com.
NOTE: The watch is not compatible with third-party bands.
1 Slide the quick-release pin on the spring bar to remove the band.
2 Insert one side of the spring bar for the new band into the watch.
3 Slide the quick-release pin, and align the spring bar with the opposite side of the watch.
4 Repeat steps 1 through 3 to change the other band.

Specifications

Battery type
Water rating
Operating and storage temperature range
Charging temperature range
European Union (EU) wireless frequencies (power)

Battery Information

The actual battery life depends on the features enabled on your watch, such as phone notifications, GPS,
internal sensors, and connected sensors.
Mode
Smartwatch mode
All satellite systems mode
1
The device withstands pressure equivalent to a depth of 50 m. For more information, go to www.garmin.com/waterrating.
Device Information
Rechargeable, built-in lithium-ion battery
1
5 ATM
From -20º to 60ºC (from -4º to 140ºF)
From 0º to 45ºC (from 32º to 113ºF)
2.4 GHz @ 4 dBm maximum, 13.56 MHz @ 70 dBuV/m
Battery Life
Up to 10 days typical use
Up to 15 hr. typical use
27