Ruijie RG-RAP73Pro Installation Manual page 19

Installation Guide
3
Installing the AP
The RG-RAP73Pro must be installed indoors, and used in a fixed place.
Caution
Before installing the AP, make sure that you have carefully read the requirements described in Chapter 2.
3.1 Before You Begin
Before installing the RG-RAP73Pro, carefully plan and arrange the installation location, networking mode, power
supply, and cabling. Confirm the following requirements before installation:

The installation site should provide sufficient space for heat dissipation.

The installation site meets the temperature and humidity requirements of the AP.

The power supply and required current are available in the installation site.

The selected power supply modules meet the system power requirements.

The installation site meets the cabling requirements of the AP.

The installation site meets the site requirements of the AP.

The customized AP meets the client-specific requirements.
3.2 Safety Precautions During Installation
To ensure the normal operation and prolonged service life of the AP, observe the following safety precautions:

Do not power on the AP during installation.

Place the AP in a well-ventilated environment.

Do not expose the AP to high temperature.

Keep the AP away from high-voltage power cables.

Install the AP indoors.

Do not expose the AP to a thunderstorm or strong electric field.

Keep the AP clean and dust-free.

Cut off the power supply before cleaning the AP.

Do not wipe the AP with a damp cloth.

Do not wash the AP with liquid.

Do not open the enclosure when the AP is working.

Secure the AP properly.
12
Installing the AP