Connect To Pc - Poly Voyager Legend 50 UC User Manual

Connect to PC

12 Chapter 5 Connect and pair
1. To put your headset in pair mode, slide and hold the Power
from the off position until you hear "Pairing" and the headset LEDs flashred
and green.
2. Select Connect on the PC notification.
When your headset is successfully paired, you hear "Pairing successful" and
"PC connected." You receive a PC notification that the device is paired and
ready to use.
Your Bluetooth USB adapter provides the best connection, softphone functionality,
and acoustic sound quality through your headset. The adapter comes pre-paired
to your headset.
1. Turn on your headset and insert the Bluetooth USB adapter into your laptop
or PC.
The USB adapter LED flashes and then turns solid to indicate the headset is
connected to the USB adapter. If you are wearing your headset, you hear "PC
connected" to indicate the connection is established.
When on a call, the LED on the USB adapter flashes blue. When not on a call
the LED is solid.
2. Load Poly Lens Desktop by visiting hp.com/lens-app.
This app enables you to customize your headset behavior through advanced
settings and options.
switch away