Advertisement
PRODUCT FEATURES
It is important to be familiar with the parts of the activTek Induct 750
If any parts are missing, contact your sales representative or Distributor.
UV Bulb Indicator
INSTALLATION HARDWARE (SUPPLIED)
(2) Thumb screws
RECOMMENDED INSTALLATION TOOLS
CAUTION
3 1/2" Hole Saw
(for wood or metal)
YOU MAY ALSO NEED:
Utility Knife
4
activTek
(includes UV Bulb)
(8) #8 — .75
1/4" Self-tapping screws
When the unit is installed in a roof mounted HVAC system, the unit must be
protected from elements.
Drill / Power
Driver
Tin Snips
(for metal ductwork)
Cell Assembly
®
Safety
Switch
(4) #6 — 32 x 2" Threaded bolts
(2) Thumb nuts
Phillips
Screwdriver
Dust Mask
Ozone and activTek Induct 2000
+
Duct Mounting Plate
Power Cord
(4) #6 — 32 Toggle
bolt wall anchors
3/8" Drill Bit
(if installing into fiberglass
ducting with toggle bolts)
Ozone.
+
1/4
1/4" Nut
Driver Bit
Advertisement
Need help?
Do you have a question about the INDUCT 2000+ OZONE and is the answer not in the manual?
Questions and answers