Assa Abloy Corbin Russwin SN200 Wiegand Installation Instructions Manual page 14

6. Install Door (continued)
Install Reader Backplate and (optional*) Fire Shield
For fire-rated doors only
1. Install reader backplate and fire shield to door using two (2) #8-18 x 5/8" Phillips flat head self-drilling
screws (Figure 3a and 3b).
(2) #8 x 5/8" Phillips
flathead self-drilling
screws
FM563 11/2024
Outside Face of
Door
Reader
Backplate
Figure 3a
14
SN200 Wiegand SN210 OSDP
ED5000 Series Exit Device
Installation Instructions
(for fire-rated doors)
(2) #8 x 5/8"
Phillips flathead
self-drilling screws
1-800-810-9473 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2020 - 2024, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights
reserved. Reproduction in whole or in part without the express written permission of
ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Figure 3b