Assa Abloy Corbin Russwin SN200 Wiegand Installation Instructions Manual page 13

SN200 Wiegand SN210 OSDP
ED5000 Series Exit Device
Installation Instructions
6. Install Door
Verify Hand Bevel of Door
1. Door should be fitted and hung.
2. Verify box label for size of exit device, function, and hand.
Prep Door according to Door Marker
• Outside
• FM382 for Rim/SVR/CVR
• FM386 for Mortise.
• Inside
• FM387
Note: Reference the following
instructions for rail installation:
• FM156 Rim (standard)
• FM532 Rim (Secure Bolt )
• FM164 SVR
• FM171 CVR
• FM168 Mortise
1-800-810-9473 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2020 - 2024, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights
reserved. Reproduction in whole or in part without the express written permission of
ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
®
Outside Face
of Door
Left Hand
Reverse LHR
TEMPLATES*
Rim T31215
CVR
T31215
SVR T31218
Mortise
T31217
*For door manufacturer templates visit www.corbinrusswin.com
and reference template numbers.
(Rim prep shown)
13
Inside
Right Hand
Outside
Reverse RHR
Figure 1
T31216
T31216
T31219
3/8" Raceway
Inside Face
of Door
Figure 2
FM563 11/2024