Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for GABOR DM-602
Summary of Contents for GABOR DM-602
- Page 1 DM-602 / LEVITOUCH DUAL-ARM MONITOR MOUNT User Manual for 17-35 in. Desktop Computer Monitors...
- Page 2 Thank you for Safety Warnings choosing Gabor. The Gabor Levitouch Dual-Arm Monitor • Please read and follow the • Make sure this product is intact • This product may contain small instructions, and keep this and there are no missing parts.
- Page 3 Product Specifications Monitor Display Size Maximum Reach 1.85 in. 10.7-12.8 in. (4.7 cm) (27.2-32.6 cm) 17 to 35 in. (43.2 to 88.9 cm) 21.1 in. (53.6 cm) 8.26 in. Maximum Load (per arm) Maximum Desktop Thickness (21.0 cm) ±90° Flat: 2.2 to 35.2 lb. (1 to 16 kg) Clamp: 3.1 in.
- Page 4 Overview Required Tools Phillips screwdriver M6 × 10 M8 × 30 M4 × 12 4 × 70 mm 5 × 80 mm 6 × 120 mm...
- Page 5 Clamp Installation Step 1 Step 2 Step 3 Attach the brace Loosen the two Loosen the clamp. to the base. attached screws on the brace. 0.25 in (6mm)
- Page 6 Clamp Installation (cont) To secure the clamp to a surface 0.4 to 1.8 in. (10 to 45 mm) thick, To secure the clamp to a surface 1.8 to 3.15 in. thick, (45 to 80 mm) follow these steps. follow these steps. Attach the clamp adapter Important! Make sure the back Flip the clamp adapter...
- Page 7 Grommet Installation Important! Predrilled holes should be between 0.4 and 2.4 in. (10 and 60 mm) wide. Step 1 Step 2 Step 3 Step 4 Attach the grommet to a surface Unthread the clamp knob Thread the clamp Thread the clamp knob up to 1.6 in.
- Page 8 Arm Installation Step 1 Step 2 Step 3 Step 4 The arms rotate ±180° (default) or Tighten the arm’s setscrew to Seat the top arm in the bottom arm, Attach the monitor mount ±90°. Set the rotation degrees before secure it to the base. and tighten the top arm’s setscrew.
- Page 9 Attaching a Monitor to the VESA Plate Important! For large and heavy monitors, it’s recommended that two people hang the monitor. VESA 75 100 PATTERNS 0.12 in (3mm)
- Page 10 Balancing the Arm Important! To avoid damage to the monitors When the arm is adjusted to the Support the monitor with one or mount, always keep the arm in a horizontal ideal tension, it will hold the hand and position the arm and position while making adjustments, and do monitor in position indefinitely.
- Page 11 Adjusting the Monitor Orientation Cable Organization Pivot There are three pivots which provide ±90° of rotation and offer adjustable tension. Tilt The monitor can tilt Rotation ±90° and offers The monitor can rotate adjustable tension. ±90° for horizontal and vertical orientation. Run the monitor cables through the upper, lower, and rear cable guides for a clean and uncluttered desk.
- Page 12 To obtain warranty coverage, contact the Gabor Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Gabor along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
Need help?
Do you have a question about the DM-602 and is the answer not in the manual?
Questions and answers