Dell PowerEdge R610 Hardware Owner's Manual page 41

Dell server hardware owner's manual
Hide thumbs Also See for PowerEdge R610:
Table of Contents

Advertisement

Table 1-2. System Messages (continued)
Message
CPUs with
different cache
sizes detected.
CPUs with
different core
sizes detected!
System halted
CPUs with
different
logical
processors
detected! System
halted
CPUs with
different power
rating detected!
System halted
Current boot mode
is set to UEFI.
Please ensure
compatible
bootable media is
available. Use
the system setup
program to change
the boot media as
needed.
Decreasing
available memory
DIMM
configuration on
each CPU should
match.
Causes
Mismatched processors are
installed.
The boot option selected in
the UEFI Boot Manager is
not installed in the system.
Faulty or improperly installed
memory modules.
Invalid memory
configuration on a dual-
processor system. The
DIMM configuration for
each processor must be
identical.
Corrective Actions
Ensure that all processors
have the same cache size,
number of cores and logical
processors, and power
ratings, and that they are
properly installed. See
"Processors."
Ensure that the boot option
specified in the UEFI Boot
Manager is installed in the
system. See "Using the
System Setup Program and
UEFI Boot Manager."
Reseat the memory modules.
See "Troubleshooting System
Memory."
Ensure that the memory
modules are installed in a
valid configuration. See
"System Memory."
About Your System
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge a03

Table of Contents