Dell PowerEdge R610 Hardware Owner's Manual page 113

Unlatch the fan assembly and lift it far enough out of the chassis to
c
route the SAS cable along the inside of the chassis, underneath the
plastic retention clip. Replace the fan assembly and close the latches.
See Figure 3-14, "Removing a Cooling Fan," and "Replacing a Cooling
Fan."
Attach the connector labeled "SAS A" to connector SAS A on the
d
backplane, and attach the connector labeled "SAS B" to connector
SAS B on the backplane. See Figure 3-17.
Figure 3-17. Installing the Integrated Storage Controller Card
8
7
6
1 SAS data cable connector
3 back card edge guide (black)
5 front card edge guide (blue)
7 SAS data cable
5 Close the system. See "Closing the System."
1
5
2
3
2 integrated storage controller card
4 expansion card riser 1
6 RAID battery connector (PERC only)
8 cable retention clip
Installing System Components
4
113