Figure 3-1. Inside the System
11
10
9
1
power supply bays (2)
3
iDRAC6 Enterprise card
5
memory modules (12)
7
SAS backplane
9
optical drive
11
Internal SD Module
Removing and Replacing the Optional Front Bezel
1 Unlock the keylock at the left end of the bezel.
2 Lift up on the release latch next to the key lock.
3 Rotate the left end of the bezel away from the front panel.
4 Unhook the right end of the bezel and pull the bezel away from the
system.
78
Installing System Components
12
8
1
6
7
2
expansion-card riser (2)
4
integrated storage controller card
6
heat sink/processor (2)
8
hard drives (6)
10
RAID battery (PERC only)
12
fans (5 or 6)
2
3
4
5