Page 1
SERIF LIFT 1045 & 1046 ™ LAPTOP TABLE USER MANUAL LET’S GET STARTED. DESIGN JEFF BARE...
Page 2
Congratulations on the purchase of your Serif Lift Laptop Table from BDI. Your lift laptop table has been designed to provide a lifetime of enjoyment. This manual will provide you with assembly instructions and other helpful information to ensure that you get the most out of your product.
Page 3
HARDWARE AND COMPONENTS Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface, such as carpet. For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa.com. For all other concerns, please contact your BDI retailer.
Page 4
Position (C3) Lift Column as shown noting correct hole pattern. Attach (C3) Lift Column to the bottom of (C1) Top using T1-HEX DRIVER (H1) Pan Head Screws and (T1) Hex Driver. H1-SCREW Hole Pattern 4 | BDIUSA.COM SERIF LIFT 1045 & 1046...
Page 5
STEP 2. ATTACH BASE ASSEMBLY Attach (C2) Base using (H2) Flat Head Screws PART/DESCRIPTION going into the countersunk holes and into the bottom of (C3) Lift Column. T1-HEX DRIVER Tighten with (T1) Hex Driver. H2-SCREW NEED ASSISTANCE? customerservice@bdiusa.com | 5...
Page 6
TV, Serif’s slim base glides neatly under a sofa or chair, putting the table surface close at hand. Weight limit: 25 lbs DO NOT sit or stand on table. 2 handed push down 2 handed pull up 30.25 in 77 cm 20.5 in 52 cm 6 | BDIUSA.COM SERIF LIFT 1045 & 1046...
Page 7
While BDI’s stained wood finishes are stable in tone & appearance, all finishes are subject to some degree of discoloration with prolonged exposure to direct sunlight. Please avoid positioning your BDI cabinet in any area with ample direct sunlight.
Page 8
Select chairs carry coverage for five (5) years from the date of the product delivery, based on an 8-hour daily use pattern. BDI reserves the right to refine or update its warranty from time to time. See the complete and latest warranty document at www.bdiusa.com/warranty.
Need help?
Do you have a question about the SERIF LIFT 1045 and is the answer not in the manual?
Questions and answers