LOGICDATA CBIsolid Series Operating Manual page 6

2 SAFETY
2.1 TARGET AUDIENCE
This Operating Manual is intended for Skilled Persons only. Refer to Chapter 2.8 Skilled Persons on page 9 to
ensure that personnel meet all requirements.
2.2 GENERAL SAFETY REGULATIONS
In general, the following safety regulations and obligations apply when handling the product:
• Do not operate the product unless it is in a clean and perfect condition
• Do not remove, change, bridge, or bypass any protection, safety, or monitoring equipment
• Do not convert or modify any components without written approval from LOGICDATA
• In the event of malfunction or damage, faulty components must be replaced immediately
• Unauthorized repairs are prohibited
• Do not attempt to replace hardware unless the product is in a de-energized state
• Only Skilled Persons are allowed to work with CBIsolid Handsets
• Ensure that national worker protection conditions and national safety and accident prevention
regulations are observed during operation of the system
2.3 INTENDED USE
The products in the CBIsolid Family are Handsets for electrically Height-Adjustable Tables. They are
installed by Resellers into Height-Adjustable Table systems. They are used to control Height-Adjustable
Table systems via a Control Box. They are intended for indoor use only. They may only be installed in
compatible Height Adjustable Tables and with LOGICDATA-approved accessories. Contact LOGICDATA for
further details. Use beyond or outside the intended use will void the product's warranty.
2.4 REASONABLY FORESEEABLE MISUSE
Usage outside of the intended use may lead to minor injury, serious injury, or even death. Reasonably
foreseeable misuse of the Handset includes, but does not extend to:
• Connecting unauthorized parts to the product. If you are unsure as to whether a part can be
used with a Handset, contact LOGICDATA for further information
CBISOLID FAMILY OPERATING MANUAL // PAGE 6