Google Nest Learning Thermostat 4th Gen Installation And Configuration Manual page 82

Action:
Switch between Heating,
Cooling, and Range modes
Heat pump:
Setting compressor
and auxiliary lockout
temperatures
Heat pump:
Change heat pump valve
orientation
Reference Material - "How To" Quick Reference Guides
Steps:
To switch to and from heating and cooling modes, follow these steps:
1) Press the thermostat face to bring up the menu
2) Select the Mode Icon
3) Turn the ring to select HEAT, COOL, HEAT • COOL, or OFF
4) Press the ring again to confirm the mode selection
Both auxiliary and compressor lockout temperatures can be changed in the
Equipment Settings menu of the Google Home app. By default, the Nest
Learning Thermostat will lock out the auxiliary heater when the outdoor
temperature is above 40°F but will not lockout the compressor at any
temperature.
The lockout temperatures are only enforced when the Nest Learning
Thermostat is connected to Wi-Fi so it can track outdoor temperatures.
To access the Heat Pump section of Equipment settings:
1) Navigate to the thermostat in the Google Home app
2) Select settings in the top right
3) Select "Thermostat"
4) Scroll down to "Equipment"
5) Select and adjust Lockout Temperatures
Follow these steps:
Navigate to the thermostat in the Google Home app
●
Select settings in the top right
●
Select "Thermostat"
●
Scroll down to "Equipment"
●
Select Heat Pump
●
Select O wire or B Wire under Heat Pump Wire
●
81