IBM Storage Networking SAN256B-7 Installation, Service And User Manual page 106

Table 17. Port Blade LED Descriptions (continued)
LED Purpose
Status
82 IBM Storage Networking SAN256B-7: SAN256B-7 Installation, Service, and User Guide
Color
No light (LED is off)
Steady amber
Slow-flashing amber (on
1.28 seconds, then off
1.28 seconds)
Fast-flashing amber (on
320 ms second, then off
320 ms)
Status
The blade is either
healthy or does not have
power.
The blade is faulty.
The blade is not seated
correctly or is faulty.
Environmental range has
been exceeded.
Recommended Action
Verify that the power
LED is on.
Ensure that the blade is
firmly seated and check
the status by entering
the slotShow
command. If LED
remains amber, consult
the device supplier.
Pull the blade out and
reseat it. If LED
continues to flash,
replace the blade.
Check for out-of-bounds
environmental
conditions and correct
them.