Programmed Edit Recording - Aiwa NSX-MTD9 Operating Instructions Manual

remaining on the tape (with the minus mark).
• Recording is inhibited if the erasure prevention tab on either side of the tape is broken off.
• The Al edit recording function cannot be used with discs containing 31 tracks or more. "TR OVER" is displayed if
this is attempted.
RECORDING (cont) pg. 22

PROGRAMMED EDIT RECORDING

In the programmed edit recording function, the tracks can be programmed while checking the remaining time on
each side of the tape.
The programmed edit recording will not start from a point halfway in the tape. The tape must be recorded from the
beginning of either side.
1 Insert the tape into deck 2, and press DOLBY NR to turn Dolby NR on or off.
Insert the tape with the side to be recorded on first facing out from the unit.
2 Press CD and load the disc(s).
3 Press CD EDIT/ CHECK twice.
"EDIT" lights up and "PRGM" flashes on the display.
When "Al" is displayed, press CD EDIT/CHECK again.
4 Press or to designate the tape length.
10 to 99 minutes can be specified.