TSI Instruments VELOCICALC 9555 Series Operation And Service Manual page 8

Connecting the Optional Bluetooth Portable Printer
To connect the Bluetooth printer to the Model 9555, power on the unit and
the printer. Then select the MENU soft key. From the Menu use the
keys to highlight Discover Printer and press the
printers are in the area, turn them off before searching. The Model 9555 will
then search for and list all available Bluetooth devices. Select the device
"Handy700".
If the Model 9555 has previously been connected to a TSI printer, then it
should automatically reconnect to that printer.
If the printer prints question marks (??????), asterisks (******), or random
characters, reset it by turning it off and then on again. If necessary, refer to
the Portable Printer Manual.
Connecting to a Computer
Use the Computer Interface USB Cable provided with the Model 9555 to
connect the instrument to a computer for downloading stored data or for
remote polling. Connect the end labeled "COMPUTER" to the computer
USB port and the other end to the data port of the Model 9555.
For more information on how to download stored data see Chapter 3 section
titled TrakPro™ Data Analysis
Caution: This symbol is used to indicate that the data port
of the Model 9555 is not intended for connection to a
public telecommunications network. Connect the USB
data port only to another USB port.
4
Software.
key. If other TSI Bluetooth-
and
Chapter 2