ST STM32WB07 Manual page 2

1 Features
• Ultra-low-power wireless
256 Kbytes of flash memory and 64 Kbytes of SRAM in a VFQFPN48 package
• MCU RF board (MB2119):
– 2.4 GHz RF transceiver supporting Bluetooth
– Built‑in PCB antenna
• Three user LEDs
• Three user and one reset push-buttons
• Board connectors:
– USB Type-C
– ARDUINO
– ST morpho headers for full access to all STM32 I/Os
• Flexible power-supply options: ST-LINK USB V
• On-board STLINK-V3EC debugger/programmer with USB re-enumeration capability: mass storage, Virtual
COM port, and debug port
• Comprehensive free software libraries and examples available with the
• Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded
Workbench
Note:
For information on Bluetooth
Note: Arm and Cortex are registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
UM3344 - Rev 1
STM32WB07CC
®
®
Uno V3 expansion connector
®
, MDK-ARM, and STM32CubeIDE
®
, refer to the www.bluetooth.com
microcontroller based on the Arm
®
specification v5.4
or external sources
BUS
website
UM3344
Features
‑M0+ core, featuring
® ®
Cortex
STM32CubeWB0 MCU Package
page 2/51