Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Crystal Mountain EVEREST
Summary of Contents for Crystal Mountain EVEREST
- Page 1 EVEREST Bottled Water Dispenser User Manual...
- Page 2 1、Hot Button 4、Drip Tray 2、Childproof Safety Switch 5、Cup Dispenser 3、Cold Button Parts may not appear exactly as shown...
- Page 3 THANK YOU FOR BUYING A CRYSTAL MOUNTAIN WATER COOLER! RECEIVING Inspect the cooler box immediately and carefully for any evidence of shipping or handling damage before signing to receive goods. In case of shipping damage, claims should be filed immediately with the carrier. Please note that the manufacture nor the carrier will not accept claims for any damage discovered after the signing for UNINSPECTED GOODS.
- Page 4 4. Ensure that the available power supply matches the cooler's voltage specifications indicated on the nameplate label (located at the rear). Plug power supply cord into receptacle(Figure 5). Please ensure that cooler is set up so as access to the power outlet and plug is unobstructed.
- Page 5 6.3 Use a bucket to drain water from the cold water reservoir through faucets (Figure 12). Turn off hot tank switch as above(Figure 13). Allow 1 hour for the hot water to cool down inside the hot water tank. Remove the drain plug at the rear of the cooler to drain in to a container (Figure 14 and Figure 15).
- Page 6 CLEANING Do not immerse the unit in water for cleaning External: With the electrical power off (Figure 16), use only mild dishwashing liquid or cleaning products and a soft cloth for cleaning the exterior surfaces (Figure 17). DO NOT USE bleach or abrasive cleaners. Use a vacuum cleaner to remove dirt and lint from the condenser (Figure 18).
- Page 7 Everest Series Bracket Installation Instructions INSTALLATION 1.Remove the two mounting screws that secure the upper support to the outer enclosure. 2. While holding the “S” shaped bracket against the cooler (refer to diagram) reinstall and tighten the upper support/outer enclosure screws securely.
- Page 8 WARNING: The warranty and Underwriters’ Laboratory and CE listings for the coolers are invalidated if any alteration, modification, or use or misuse in combination with any other machine or devices is deemed to be the source of any claim. The manufacturer accepts no liability (including for bodily injury) resulting from any alteration, misuse, neglect, accidents, improper installations or repairs.
Need help?
Do you have a question about the EVEREST and is the answer not in the manual?
Questions and answers