Removing The Inspection Cover - APRILIA SCARABEO 50 I.E - 2002 Manual

2
1
REMOVING THE FRONT HAN-
DLEBAR COVER
Carefully read p. 50 (MAINTENANCE).
Place the vehicle on the center stand.
Unscrew and remove the two screws (1).
Unscrew and remove the two screws (2).
CAUTION
Proceed with care, in order not to dam-
age the seat (3) of the tang (4).
Using a small blade screwdriver, lift the
tang (4) positioned inside the front handle-
bar cover (5).
64 use and maintenance Scarabeo 50
4
1
Repeat the operation described above
on the lower part of the handlebar cover.
CAUTION
Handle the plastic and painted compo-
nents with care and avoid scraping or
damaging them.
Remove the front handlebar cover (5), tak-
ing care not to break the tangs.
NOTE
Upon reassembly, make sure that
the tangs are correctly inserted.
5
3
REMOVING
THE INSPECTION COVER
Carefully read p. 50 (MAINTENANCE).
Before carring out the following opera-
tions, let the engine and the exhaust si-
lencer cool down until they reach room
temperature, in order to avoid burns.
Handle the plastic and painted compo-
nents with care and avoid scraping or
damaging them.
7
WARNING
CAUTION
Place the vehicle on the center stand.
Unscrew and remove the screw (6).
Remove the inspection cover (7).
6