Installing The Front Bezel; Removing The Expansion Card - Dell OptiPlex XE2 Small Form Factor Owner's Manual

Installing the front bezel

1. Insert the hooks along the bottom edge of the front bezel into the slots on the chassis front.
2. Push the bezel toward the computer to engage the front bezel retention clips until they click into place.
3. Install the cover.
4. Follow the procedure in

Removing the expansion card

1. Follow the procedure in
2. Remove the cover.
NOTE: If your computer has a powered expansion card perform step 3 and step 4, else perform step 5.
3. Disconnect the power cable from the card. Rotate the release tab on the card-retention latch upward.
After working inside your computer.
Before working inside your computer.
11