Lubricant Table - APRILIA RS 125 - 1996 Manual

LUBRICANT TABLE

Transmission oil (recommended):
As an alternative to the recommended oil, it is possible to use high-quality oils with characteristics in compliance
with or superior to the A.P.I. GL-4 specifications.
Mixer oil (recommended):
As an alternative to the recommended oil, it is possible to use high-quality oils with characteristics in compliance
with or superior to the ISO-L-ETC++, A.P.I. TC++ specifications.
Fork oil (recommended):
If you need an oil with intermediate characteristics in comparison with the two recommended products, these can
be mixed as indicated below:
0
– SAE 10W F.A. 5W 67% of the volume, +
0
– SAE 15W F.A. 5W 33% of the volume, +
Bearings and other lubrication points (recommended):
As an alternative to the recommended product, use high-quality grease for rolling bearings, working temperature
range - 30°C...+ 140°C, dripping point 150°C... 230°C, high protection against corrosion, good resistance to water
and oxidation.
Protection of the battery poles: neutral grease or Vaseline.
Spray grease for chains (recommended):
Brake fluid (recommended):
a
Use new brake fluid only.
Engine coolant (recommended):
a
Use only antifreeze and anticorrosive without nitrite, ensuring protection at -35°C at least.
84
0
F.C., SAE 75W-90.
0
MAX 2T COMPETITION
0 0
F.A. 5W or F.A. 20 W fork oil.
0
CHAIN SPRAY.
0
F.F., DOT 5 (compatible with DOT 4).
0
ECOBLU -40°C.
0
F.A. 20W 33% of the volume.
0
F.A. 20W 67% of the volume.
0
AUTOGREASE MP.