REASSEMBLY
Read page 50 carefully.
To reassemble the wheel:
– position the wheel between the fork rods;
– insert the pin (3-Fig. 35);
– insert and turn the screw (2-Fig. 34) until the pin
sets in the seat;
– position the odometer cable correctly (1-Fig. 35);
– tighten the four screws of the fork clamps (2-Fig.
34) (3-Fig. 35);
– tighten the screw (2-Fig. 34).
Driving torque: 80 Nm (8 kgm);
– mount the brake calliper, tightening the screws (1-
Fig. 34).
a
After the reassembly, pull the brake lever
repeatedly and check the correct func-
tioning of the braking system.
Check the wheel centering.
Have the driving torque, centering and balancing
of the wheel checked by your aprilia Official
Dealer, in order to avoid accidents that may be
harmful for you and other people.
59