APRILIA RS 125 - 1996 Manual page 56

56
Fig. 32
Fig. 33
Adjustment
If after the checking it is necessary to adjust the
chain tension, proceed as follows:
– loosen the fastening nut of the rear wheel pin (1-
Fig. 32);
– loosen the two lock nuts of the right (2-Fig. 32) and
left (1-Fig. 33) adjusters, positioned near the rear
wheel pin;
– act on the right (3-Fig. 32) and left (2-Fig. 33) ad-
justers, making sure that the fixed references on
the rear fork coincide on both sides with the mark
stamped on the mobile plates (4-Fig. 32, 3-
Fig. 33);
– once the operation has been completed, tighten
the fastening nut of the rear wheel pin.
Driving torque: 100 Nm (10 kgm);
– tighten the lock nuts of the two adjusters;
– tighten the right and left screws;
– check the slack again (page 55).