APRILIA RS 125 - 1996 Manual page 61

REASSEMBLY
Read page 50 carefully.
To reassemble the wheel, carry out the following op-
erations:
– position the wheel between the rear fork arms;
– push the wheel forward and position the chain in
its seat;
– position the antirotation pin correctly in the brake
plate seat;
– insert the pin (1-Fig. 37);
– insert and screw the nut (1-Fig. 36) until the pin
sets in the seat;
– check the chain tension (page 55);
– tighten the nut (1-Fig. 36).
Driving torque: 100 Nm (10 kgm).
a
After the reassembly, pull the brake lever
repeatedly and check the correct func-
tioning of the braking system.
Check the wheel centering.
Have the driving torque, centering and balancing
of the wheel checked by your aprilia Official
Dealer, in order to avoid accidents that may be
harmful for you and other people.
61