APRILIA RS 125 - 1996 Manual page 28

How to use the LAP function.
(Only for races in places that are closed to traf-
fic).
To initialize the computer for the
timing function, press the "S" push
button. The letter "L" (Lap) will blink
on the display.
To start the stop-watch, press the
"LAP" push button, positioned on
the left half of the handlebars.
To display the time taken for one
lap, press the "LAP" push button
again. After pressing the "LAP"
push button, the time obtained in
the previous lap is displayed for
about 15 seconds, after which the current time is dis-
played again.
To end the timing, press the "S"
push button.
c
It is possible to carry out up to 10 timings.
At the last timing, the writing "L10" will
appear on the display.
28
How to recall the time per lap (LAP MEMORY)
To recall the time per lap, press the
"L" push button.
The writing "Ld" will appear on the
display.
To run through the stored times per
lap, press the "LAP" push button.
The writing "Ld 01" corresponds to
lap no. 1, "Ld 02" corresponds to
lap no. 2 and so on.
How to delete the stored data
To delete the stored data, press
the "L" push button.
The writing "L10", "L9" or "L8", etc.
will appear on the display.
Now, press the "S" push button
and, keeping it pressed, press also
the "LAP" push button on the left
half of the handlebars.
In this way the stored data will be
definitively deleted.