Changing The Number Plate Bulb - APRILIA RS 125 - 1996 Manual

78
Fig. 59
Fig. 60
CHANGING THE DIRECTION INDICATOR
BULBS (Fig. 59)
Read pages 76 and 50 carefully.
Proceed as follows:
– extract the screw (1);
– remove the protection glass (2);
– press the bulb slightly and rotate it anticlockwise;
– remove the bulb from its seat;
– correctly install a new bulb.
Repeat the above operations in the reverse order for
the reassembly.
c
Tighten the screw (1) with slight pressure,
otherwise the protection glass may break.

CHANGING THE NUMBER PLATE BULB

(Fig. 60)
Read pages 76 and 50 carefully.
Proceed as follows:
– remove the 3 screws that fasten the plate frame;
– remove the socket (2) by unscrewing the two fas-
tening screws (1);
– extract the bayonet joint bulb and install a new
bulb.
For the reassembly, carry out the operations de-
scribed above in the reverse order.