Changing The Rear Light Bulb; Changing The Number Plate Bulb - APRILIA LEONARDO 125 - 1999 Manual

Carefully read p. 60 (BULBS).
The rear light contains:
– A parking light/stoplight bulb (1).
– Two rear direction indicator bulbs (2).
To change them:
Loosen the screws (3) in such a way as
to facilitate the successive reinsertion of
the protection screen (4).
Unscrew and remove the screws (5).
CAUTION
While removing the protection screen,
proceed carefully in order not to break
the cog.
62
use and maintenance Leonardo 125 - Leonardo 150 - Leonardo 250
Remove the protection screen (4).
Slightly press the bulb and rotate it anti-
clockwise.
Remove the bulb from its seat.
NOTE
Insert the bulb in the socket, mak-
ing the two bulb pins coincide with the rele-
vant guides on the socket.
Correctly install a new bulb of the same
type.
NOTE
Upon reassembly, correctly posi-
tion the protection screen in its seat.
CAUTION
Tighten the screws (5) carefully, without
exerting too much pressure, in order to
avoid damaging the protection screen.
Carefully read p. 60 (BULBS).
To change the bulb:
Unscrew and remove the screw (6).
Remove the light unit (7).
CAUTION
Do not pull the electric wires to extract
the bulb socket.
Grasp the bulb socket (8), pull it and re-
move it from its seat.
Withdraw the bulb (9) and replace it with
a new one of the same type.