Removing The Rear-View Mirrors; Removing The Front Cover - APRILIA LEONARDO 125 - 1999 Manual

Carefully read p. 39 (MAINTENANCE).
The following information refers to one
rear-view mirror only, but is valid for both.
Position the vehicle on the centre stand.
NOTE
Group the components of the left
and right rear-view mirrors separately.
Remove the cover (1).
CAUTION
Hold the rear-view mirror (2), to prevent
it from accidentally falling down.
Unscrew the screw (3).
Screw (3) driving torque: 20 Nm (2 kgm).
CAUTION
Handle the plastic and painted compo-
nents with care and avoid scraping or
damaging them.
Remove the rear-view mirror (2).
Take the support (4) and the pro-
tection element (5).
Remove the gasket (6).
Carefully read p. 39 (MAINTENANCE).
Position the vehicle on the centre stand.
Unscrew and remove the screws (7).
CAUTION
Proceed with care.
Do not damage the tangs and/or their
seats.
Handle the plastic and painted compo-
nents with care and avoid scraping or
damaging them.
Remove the front cover (8) by pulling it
downwards.
CAUTION
Upon reassembly, fit the tangs correctly
in the appropriate seats.
use and maintenance Leonardo 125 - Leonardo 150 - Leonardo 250
51