Main Independent Controls; Controls On The Left Side Of The Handlebar - APRILIA LEONARDO 125 - 1999 Manual

18
use and maintenance Leonardo 125 - Leonardo 150 - Leonardo 250
NOTE
The electrical parts work only when the ignition switch is
in position " ".
1) HORN PUSH BUTTON (
The horn is activated when the "
2) DIRECTION INDICATOR SWITCH (
To indicate the turn to the left, move the switch to the left; to
indicate the turn to the right, move the switch to the right.
To turn off the direction indicator, press the switch on its cen-
tre.
3) DIMMER SWITCH (
( not provided, provided for those countries where
the engine stop switch "
When the light switch is in position "
is in position " ", the high beam comes on, while if it is in po-
sition " ", the low beam comes on.
3) DIMMER SWITCH (
LER PUSH BUTTON (PASSING
( not provided, provided for those countries where
the engine stop switch "
When the light switch is in position "
is in position " ", the high beam comes on, while if it is in po-
sition " ", the low beam comes on.
The high beam signaller is operated by pressing the dimmer
switch to position (PASSING
tion of the light switch (
NOTE
When the dimmer switch is released, the high beam
signaller is disconnected.
)
" push button is pressed.
)
- )
- " is required)
": if the dimmer switch
- ) / HIGH BEAM SIGNAL-
)
- " is required)
": if the dimmer switch
), independently of the posi-
- - • ).