Changing The Headlight Bulbs; Low Beam Bulbs/High Beam Bulbs (Halogen); Low/High Beam Bulbs; Parking Light Bulbs - APRILIA LEONARDO 125 - 1999 Manual

Carefully read p. 60 (BULBS).
The headlight contains:
– Two low/high beam bulbs.
– One parking light bulb (two parking light
bulbs ).
To change the bulbs, proceed as fol-
lows:
Remove the front cover, see p. 51 (RE-
MOVING THE FRONT COVER).
Unscrew and remove the screws (1) and
take the washers.
Remove the air conveyor (2) by with-
drawing it from the upper pins.
NOTE
Do not remove the protection ele-
ment (3) completely, since it is fixed to the
headlight body with two rivets.
By lifting the upper fastening tang, move
the protection element (3) with your hands.
LOW BEAM BULBS/HIGH BEAM BULBS
(HALOGEN)
CAUTION
To extract the bulb electric connector,
do not pull its electric wires.
Grasp the bulb electric connector (4),
pull it and disconnect it from the bulb (5).
Rotate the bulb socket (6) anticlockwise
and extract it from the reflector.
Extract the bulb (5).
For the reassembly:
NOTE
Insert the bulb (5) in the reflector,
by making the two elements (7) on the bulb
coincide with the respective guides (8) on
the reflector.
Position the bulb socket (6) in the reflec-
tor and rotate it clockwise.
Connect the bulb electric connector (4).

LOW/HIGH BEAM BULBS

Rotate the bulb socket (9) anticlockwise
and extract it from its seat.
Slightly press the low/high beam bulb
(10) and rotate it anticlockwise, extract it
and replace it with a new one of the
same type.

PARKING LIGHT BULBS

CAUTION
To extract the bulb socket, do not pull
its electric wires.
Grasp the bulb socket (11), pull it and
take it out of its seat.
Extract the parking light bulb (12) and re-
place it with a new one of the same type.
use and maintenance Leonardo 125 - Leonardo 150 - Leonardo 250
61