3
NOTE
Insert the bulb in the bulb socket,
carefully aligning the two bulb pins with their
guides in the socket.
♦
Correctly install a new bulb of the same
type.
♦
For reassembly, proceed in reverse order.
For the RIGHT direction indicator:
♦
Remove the secondary fuse box (3) from
its seat to make room to work.
♦
Then proceed as described for the left di-
rection indicator.
NOTE
Replacement of the turn indicator
bulbs can also be performed by removing
the loud speakers.
4
5
CHANGING HEADLIGHT BULBS
Carefully read page 78 (BULBS).
The headlight houses:
– Two high beam bulbs (4).
– One low beam bulb (5).
– One parking light bulb (6).
To replace:
♦
Removing the front hood, see page 70
(REMOVING THE FRONT HOOD).
6
LOW BEAM BULBS
Do not pull the electrical cables to extract
the bulb socket.
♦
Grasp the bulb socket, pull it and discon-
nect it from the bulb.
♦
Turn the bulb socket (7) counter-clockwise
and extract it from the reflector seat.
♦
Remove the bulb.
During reassembly:
NOTE
Insert the bulb in the reflector seat,
aligning the three notches on the bulb with
the corresponding guides on the reflector
seat.
♦
Place the bulb socket (7) in the reflector
seat and turn it clockwise.
♦
Connect the bulb socket.
use and maintenance Atlantic 500
7
CAUTION
79