Quantum DAT 72/DDS-4 User Manual page 21

Figure 1 Front Panel
Components
Installing a Desktop Autoloader
Clean
LED
(green)
Use the following procedure to install a desktop autoloader. If you need
more information about a step, turn to the section referenced in the step.
1 Unpack the contents of your drive package, and check for missing or
damaged items.
2 Review the drive's default settings and change them if necessary:
SCSI ID: 6
• Parity Checking: Enabled
• Terminator Power: Disabled
• Data Compression: Enabled
• Media Recognition (DDS-4 drives only): Enabled
• Power On Self Test (POST): Enabled
• Host Operating System: Windows 98 SE/ME/XP/NT/2000/
Windows Server 2003
• SCSI Interface Compatibility: Ultra 2 Wide SCSI for DDS-4 and
DAT 72 autoloader
• Vendor ID: SEAGATE DAT
DAT 72/DDS-4 6-Slot Autoloader User's Guide
Chapter 1 Overview, Quick Start Installation
Installing a Desktop Autoloader
LCD
Media Drive LED
Display
LED (amber)
(green)
EJECT
button
SELECT
button
ENTER
button
1
5