Table of Contents
Advertisement
WEP, WPA, WPA2 and WPA-Mixed. The default setting is
Disable. It is strongly recommended to set up a security mode
(WEP, WPA, WPA2 and WPA-Mixed) to prevent any
unauthorized access.
WEP
Key Length: Select key length 64-bit or 128-bit.
Key Format: Select the default key 1~4.
Hexadecimal (WEP 64 bits): 10 Hex characters (0~9, a~f).
Hexadecimal (WEP 128 bits): 26 Hex characters (0~9, a~f).
ASCII (WEP 64 bits): 5 ASCII characters (case-sensitive).
ASCII (WEP 128 bits): 13 ASCII characters (case-sensitive).
Encryption Key: Enter the key in the Key Setting field.
WPA
Authentication Mode: Personal (Pre-Shared Key).
WPA Cipher Suite: Only AES is supported.
Pre-Shared Key Format: There are two formats to choose from to set
the Pre-shared key, Passphrase and Hex (64 characters). If Hex is
selected, users will have to enter a 64 characters string. For easier
configuration, the Passphrase (at least 8 characters) format is
recommended.
Pre-Shared Key: Pre-Shared Key serves as a password. Users
may key in 8 to 63 characters string if you selected passphrase.
Pre-shared key format to set the passwords or leave it blank, in
which the 802.1x Authentication will be activated. Make sure
the same password is used on the client's end.
24
Advertisement
Table of Contents
