ZyXEL Communications X150N - V1.0 User Manual page 30

Network Type
SSID
Channel Width
Control Sideband
Channel Number
Broadcast SSID
WMM
Data Rate
Associated Clients
Enable Mac Clone
(Single Ethernet
Client)
Security
Security Mode
This is fixed and cannot be changed.
An SSID is referred to as network name because essentially it is a name
that identifies a wireless network.
If you select 20MHz/40MHz channel width, the channel number
will be from 5~11 and auto; If you select 20MHz channel width,
the channel number will be from 1~11 and auto. Default is
20MHz/40MHz.
You can select Lower or Upper form the pull-down list.
The channel number will be based on the channel width you
select.
Enabled This wireless AP will broadcast its SSID to stations.
:
Disabled This wireless AP will not broadcast its SSID to stations. If
:
stations want to connect to this wireless AP, this AP's SSID should
be known in advance to make a connection.
The WiFi Multiple Media function is available under 2.4GHz (B),
2.4GHz (G) and 2.4GHz (B+G) band, and is disabled under 2.4GHz
(N), 2.4GHz (G+N) and 2.4GHz (B+G+N) band.
There are several data rates that you can select from the pull-
down menu.
Click Show Active Clients button to show all the listed active
clients.
This function will be enabled under Client mode (it is not
supported here).
Select desired security type from the pull-down menu Disable,
23