Table of Contents
Advertisement
4
Chapter 2: About
Operation Modes
This device provides operational applications with Router and AP modes, which are mutually
exclusive.
If you want to change the settings in order to perform more advanced configuration or even
change the mode of operation, you can select the mode you desire by the manufacturer as
described in the following sections.
The default setting mode is Router mode.
Router Mode
In this mode, the device will connect to the Internet via ADSL/Cable Modem. The NAT
(Network Address Translation) is enabled and PCs in LAN ports share the same IP to ISP
through the WAN port. The connection type can be set up in WAN page by using PPPOE,
DHCP client, PPTP client, L2TP client or static IP.
Advertisement
Table of Contents
