Table of Contents
Advertisement
Port Forwarding
Enable Port Forwarding
IP Address
Protocol
Port Range
Comment
Apply Changes
Reset
Current Port Forwarding
Check to enable Port Forwarding function.
Enter the IP address of the device on the local network in
the field.
Select the protocol (TCP, UDP or Both) used to the remote
system or service.
For TCP and UDP Services, enter the beginning of the range
of port numbers used by the service. If the service uses a
single port number, enter it in both the start and finish
fields.
Make a note in this section to describe the configuration
After completing the settings on this page, click Apply
Changes button to save the settings.
Click Reset button to restore to default values.
Shows the current Port Forwarding information.
41
Advertisement
Table of Contents
