ZyXEL Communications X150N - V1.0 User Manual page 37

Server: Select to enable this Wireless Router to distribute IP
Addresses (DHCP Server) to connected clients. And the following field
will be activated for you to enter the starting IP address.
DHCP Client
The starting address of this local IP network address pool. The pool is a
piece of continuous IP address segment. Keep the default value
Range
192.168.1.33 should work for most cases.
•
Note: If "Continuous IP address poll starts" is set at 192.168.1.33 and
the "Number of IP address in pool" is 254, the device will distribute IP
addresses from 192.168.1.33 to 192.168.1.254 to all the computers
in the network that request IP addresses from DHCP server (Router)
Show Client Click to show Active DHCP Client Table.
Refresh: Click this button to refresh the table.
Close: Click this button to close the window.
Static DHCP Check the box to enable the Static DHCP function, default setting is
disabled. When set to enabled, user can click Static DHCP button to
set the Static DHCP function.
Maximum: 254. Default value 254 should work for most
cases.
30