ZyXEL Communications X150N - V1.0 User Manual page 43

Host Name
Attain DNS
Automatically
Set DNS Manually
DNS 1
DNS 2
Factory Default
Clone the
computer's MAC
address-IP Address
Set WAN MAC
Address
Enable uPNP
Apply Changes
Reset
IP Address: Enter the WAN IP address provided by your ISP
here.
Subnet Mask: Enter the subnet mask here.
Server IP Address: Enter the L2TP Server IP Address in this
column.
User Name: Maximum input is 20 alphanumeric characters
(case sensitive).
Password: Maximum input is 32 alphanumeric characters
(case sensitive).
Enter the host name in this field.
Select Attain DNS Automatically or select Set DNS Manually
to set the DNS server IP address at the following DNS 1~3
columns. Default setting is Attain DNS Automatically.
Enter the DNS server IP address(es) provided by your ISP, or
you can specify your own preferred DNS server IP address(es).
DNS 2 server is optional. You can enter another DNS server's IP
address as a backup. DNS 2 server will be used when the DNS 1
server fails.
Your ISP may require a particular MAC address in order for you
to connect to the Internet. This MAC address is the PC's MAC
address that your ISP had originally connected your Internet
connection to. Type in this Clone MAC address in this section
to replace the WAN MAC address with the MAC address of
that PC.
Check to enable the listed functions.
After completing the settings on this page, click Apply Changes
button to save the settings.
Click Reset to restore to default values.
36