CyberData 011579 Operation Manual page 38

2.13 Autoprovisioning
Enabling autoprovisioning allows the device to download provisioning files from a server. It defaults
to using DHCP, with options configured in dhcpd.conf on the DHCP server. The file name is <mac
address>.xml and if not found, 000000cd.xml.
If a server is named, DHCP is bypassed, and the device will look for a file on the named server..
If a file is named, it will be downloaded instead of <mac address>,xml.
If a server is named, Use tftp searches for the file on a tftp server instead of http. If the server is
secured (with a password), use Verify Server Certificate (username/password) to access it. When
using DHCP, these options are configured in dhcpd.conf.
Autoprov autoupdate, Autoprov at time, and Autoprov when idle options are available with either
DHCP or a named server.
The template is an xml file with all options set to default values.
CyberData Corporation
Figure 2-19. Autoprovisioning Page
931996E Operations Guide