U-90E Data/Fax Modem
2.2
Rear Panel
The U-90E rear panel is shown below:
Printed on
Description
U-90E Housing
Power
Power switch, turns the modem ON or OFF.
Power Jack
Input terminal for power adapter.
Line
Dial-up line RJ-11 terminal jack, for connection to a 2-wire dial-up or 2-wire leased line.
Phone
RJ-11 terminal jack, for connection to a telephone set. Pin assignments for RJ-11 phone
jacks are listed in the Appendix.
DTE/EIA 232D
Serial port DB25F connector, for connection to the serial port of a DTE (computer
terminal). Pin assignments of the DTE are listed in the Appendix.
2-4
Figure 2-2 Rear Panel
Table 2-3 Rear Panel
Modem Installation