Table of Contents
Advertisement
Command Options Function & Description
*M0 *
*M1
*Pn
n=0-31
*P11 *
*Qn
*Q0
*Q1
*Q2 *
*Q3
*T
*V
Note:
•
*V command requires the supervisor password before execution.
*Wab
Note:
•
The above command only works when the modem is on-line independent of
the type of connection involved.
*$
AT Command Set Summary
Leased line auto-handshake on originate
mode.
Leased line auto-handshake on answer
mode.
Set leased line transmission power level;
ranges from 0 dBm to –31dBm (default: -
11 dBm depends on the country code)
(see also S35.3)
Action taken when line quality changes. S27.6-7
No action to poor signal quality.
Retrain action taken if signal quality is
poor. (See also S41.2)
Adaptive rate, automatic fall-back or
forward.
Disconnect if signal quality is poor.
Recall the last CND (Caller ID)
information.
View password table.
Writes the local configuration profile a to
remote user profile b and resets the
remote modem from that profile:
a= 0-3, local user profile number
4,
local active configuration
5,
local factory default settings
b= 0-3 remote user profile number.
Extended *AT Command summary help.
U-90E Data/Fax Modem
Ref.
S17.1-4
S40.2
S36.1
5-15
Advertisement
Table of Contents
