Table of Contents
Advertisement
U-90E Data/Fax Modem
Command Options
Sr?
UPX
Vn
V0
V1 *
Xn
n=0-7
5 *
Zn
n=0-4
Zn
Z4
$
5.1.1 Result Code Options
The result codes are the command responses. When you issue a command to the
modem, the modem sends a response to you via the screen. That is called the result
code. The format of the result code is dependent on Xn and Vn command. The are eight
result code sets. The default result code set is
in verbose or numerical form using
ATV0
ATV1
0
OK
5-4
Function & Description
decimal number between 0 and 255
Display value stored in S-register 'r'
Download firmware to the Flash EPROM
by using Xmodem protocol
Sets display type for Result Codes
Display result code in numeric form. (See
also S35.7 and the result code table of
'ATXn')
Display result code in verbose form.
Result code options, see the Options
Table below.
Reset modem and set power-on profile.
Reset modem and load user profile n (0-
3).
Reset modem and load factory settings.
Basic command summary help
ATX5
ATVn
command. They are listed in the following table:
Table 5-2 Result Code Options
X0
X1
X2
X3
X4
•
•
•
•
•
Ref.
S23.6
S23.3-5
S15.5-7
. The result codes can be displayed
X5
X6
X7
•
•
•
AT Command Set Summary
Advertisement
Table of Contents
