Table of Contents
Advertisement
U-90E Data/Fax Modem
Once your modem is connected to your computer's serial port and telephone line, open
the Windows 95 "Accessories" program group, and open the Hyper Terminal Program.
The program will prompt you for a name and Icon to use for your new connection. Type
the name Test Connection and press <Enter>.
Next, you will be prompted for country information, area code and phone number, and the
device used to make the connection. For this test purpose, do not enter a phone number;
simply choose the COM port your modem is connected to from the "Connect Using" list.
Click "OK" when finished.
The next window sets the COM port settings. The settings used for your modem should
be as follows.
Bits per second:
Data bits:
Parity:
Stop bits:
Flow Control:
Click "OK" when finished. After you have done this, save your new connection by
selecting "Save" from the "File" menu and click "OK." A new connection icon will be added
to your Hyper Terminal folder.
You are now ready to start entering
In the terminal window, type:
AT<Enter>
Your modem responds
OK
4-2
Table 4-1 Modem Settings
57600
8
None
1
Hardware
AT
commands.
Basic Modem Operation
Advertisement
Table of Contents
